Evans Waterless Coolant

PowerPortal Conversions

PowerPortal Productions has been making conversions for longer than conventional coolants will ever last. 
Evans Waterless Coolant is by far, one of the best investments you will ever make in your vehicle. 

You don’t want to put water ON your car, right? So why would you pour it in your block? Conversion to Evans is relatively simple, and is a one time investment. Once you make the switch, you will never have to flush your system again.

There are so many good reasons to make the change. Contact us to discuss all the benefits & advantages that EVAN’S Waterless has to offer.

Conversion prices starting as low as $200.00

Best Decision I Ever Made!
5/5

Why Use Evans?

Evans Waterless Coolant provides distinct advantages over traditional water-based coolant. The absence of water avoids the formation of vapor, high pressure and boil-over, and prevents corrosion and electrolysis. Evans’ high boiling point and lower freeze point allow a wider and safer operating temperature range. The benefits derived from Evans can be achieved in most vehicle applications and engine types, although Evans’ performance may vary depending on cooling system configurations.

Top 5 Benefits Of Evans

Evans pays for itself.

  • No Corrosion: No more water in your cooling engine system, Evans waterless coolants prevent water-caused corrosion.
  • No Erosion: Because Evans coolants remain in liquid form and Do Not Vaporize preventing the “pitting” caused by water vapor.
  • No Overheating: Evans waterless coolant raises the boiling point from 226°F for water-based antifreeze to 375°F which prevent over-boiling — far above the operating temperature of an engine.
  • No Electrolysis: The absence of water in Evans Waterless Coolant, substantially reduces electrical conductivity of Evans coolant which sharply reduces incidents of electrolysis.
  • No Pressure: Evans coolants remain in liquid form, they prevent stress on cooling system components such as hoses, pump seals and radiator seams due to high water pressure.
  • How does Evans help stop coolant change-outs?:  Evans has always contended that the absence of water in a cooling system removes the root causes of metal corrosion, electrolysis, and high system pressures.
    No Freezing: Evans coolants have natural antifreeze properties down to -40°F—no need to worry about maintaining a balance.
    No Flushing: Evans coolants do not degrade and are designed to provide extended service.

Classic Cars

Your car is far from ordinary! Ordinary coolant won’t do!. Many classic car owners accept engine overheating as a necessary evil, with Evans, that is an event of the past. Evans High Performance Waterless Engine Coolant contains NO WATER raising its boiling point to above the operating temperature of your engine. Your engine still gets hot, but it won’t overheat!

PowerPortal and Evans want you to have more cruising time and less time on the lift or in the shop.

Hot Rods & Muscle Cars

Regardless of how cool your car is, its not cool to be stuck on the side of the road with an overheated engine. With Evans High Performance Waterless Engine Coolant, you’ll no longer be a slave to the temperature gauge. Evans coolant does not contain water, so its boiling point is significantly higher. When you use Evans waterless coolant, your engine still runs hot, but it won’t overheat, so you can keep that pedal mashed flat.

1620 Route 57 | Unit C

Hackettstown, NJ 07840

973.347.4200

$ 49.95

High Performance

Evans High Performance waterless coolant is designed for all gasoline and light duty diesel engines. Evans coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life. You love your vehicle—it deserves Evans.

$ 28.95

Cooling System Flush

Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

$ 33.95

Prep Fluid

Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

$ 53.50

Heavy Duty

Heavy duty equipment operators and fleet owners have seen extreme benefits and cost savings from using Evans waterless coolants. Large equipment can experience big problems with traditional coolant—Evans Heavy Duty waterless coolant can solve them.

Car Show & Cruise Calendar